BEMU Version 1.24b

What's New

Download Installer 39.8 MB

• Moved the Fixtures interface to the bottom of the screen. Added an Atypical interface.
• Added a recent files feature on the opening screen - and subsequent menu openings. Open already existing Bemu (.bmdf) files with the browse button if they are not in the list. It will be empty until you start opening or creating files.
• When you click to save, a red ring appears around the save button (won't even see it mostly except in the background when saving a new file). The ring turns green for three seconds after a successful save - if it is still red, then there is a problem.
• A file association can now be made with .bmdf files to open them when double-clicked in windows explorer.
• Now create the Authorization form, H2K files, Upgrades and the DCF from the Overview interface rather than the menu
• You can now enter unlimited blower door tests. For a single detached home, ensure one and only one test is set to "Primary". Backup tests should be set as Alternate but can be changed to Primary if necessary. For duplex or triplex MURBS, use the Secondary or Tertiary as appropriate.
• The windows and doors interface have been combined. Select the components from the tree to edit or move them. To move to a different component (like Door), select the window first, then select the desired container. Walls (or Doors, Ceilings, Foundations) must be added first to allow adding windows or doors. All windows or doors not in a container are set to Unallocated. Unallocated windows are not added to the H2K file. Use the ESC button if things get weird.
  The window or door name can now be customized
  Add-level buttons have been added at the bottom of the window/door interface.
• Vermiculite status can now be set in the Overview section.
• Air Leakage locations and comments are now added to the DCF.
• If you license lease expires you can now renew it under settings - internet access is required.
• You can check the tokens you have created from the main interface.
• For the purposes of creating a DCF, upgrades, invoices, receipts or an efile, an h2k file not created with Bemu can be imported.
• Windows are listed in the appropriate container (wall etc) on the DCF.
• Volumes should now be entered in the Blower Door test and not with any associated Walls etc. (this still needs to be removed from the interface)
• After creating the H2K file, while inspecting each component (walls, ceiling etc), if you have a crawlspace, you must click into the rvalue to trigger the effective insulation calculation - this should be the only component that requires this - let me know if discovered otherwise.
• Always check the weather location.